Colorful Inflatable Water Ball , Floating Inflatable Hamster Ball For Humans

Packing for water ball:

1). Material 0.8mm PVC
Weight: 13.5KG Packing: 60x40x25CM
2). Material 1.0mm PVC
Weight: 14KG Packing: 60x40x25CM
3). Material 0.8mm TPU
Weight: 13.5KG Packing: 60x40x25CM
4). Material 1.0mm TPU
Weight: 14KG Packing: 60x40x25CM

Repair Guidance:
1. Find out exactly where the leak is. Fill a spray bottle with a mixture of soap and water and spray it liberally on the ball along the seams. You will notice that the solution starts to bubble up where the leak is located, so take note of the position of the hole.
2. Prepare the hole for patching. Dry the seam off, and make sure that it is completely deflated before attempting to patch the seam. If you have the patch kit that came with the ball, you can use the prep solution to thoroughly clean the material before proceeding. Rubbing alcohol also works.
3. Apply plumber's glue to the seam and let it dry for about 15 minutes. If possible, apply some glue to the inside of the seam as well, so that it spreads out and gives an extra layer of protection.
4. Fill the ball about halfway with air and wait another 30 minutes or so to make sure that the glue has dried completely.
5. Inflate the item completely and spray it again with the soap and water mixture to make sure that the hole is indeed fixed.